福州流水線,自動化流水線,組裝線,自動組裝線:技術參考(圖)

 自動化技術廣泛應用于工業、農業、軍事、科學研究、交通運輸、商業、醫療、服務和家庭等方面。采用自動化技術不僅可以把人從繁重的體力勞動和部分腦力勞動以及惡劣、危險的工作環境中解放出來，而且能擴展人的各器官功能，極大地提高勞動生產率，增強人類認識世界和改造世界的能力。

福州流水線,福州自動化流水線,福州組裝線,福州自動組裝線：環形組裝線參數如下：

1 福州流水線,福州自動化流水線,福州組裝線,福州自動組裝線規格: L6000*W1780*H2000(mm)(一般根據客戶需求定制。

2， 福州流水線,福州自動化流水線,福州組裝線,福州自動組裝線組裝線主機腳采用40*40*1.5mm(厚)鐵方通制作每2米安裝1個.

3，加固拉筋采用25*25鐵方通制作左右各1條.

4 ，膀脾采用40*60*1.5mm扁通制作.

6， 采用Ф38鍍鋅滾筒做承托工裝楹輸送介質,每100mm*1條.

7 ，燈架用40*40*1.5mm方通制作,每2米安裝1個.

8，福州流水線,福州自動化流水線,福州組裝線,福州自動組裝線照明部分采用40W*48″”奇利”雙支帶罩光管*8套, 配25*50燈槽及電線

9 ，作業指導書架采用H型專用鋁槽,配每米綠色透明亞克力板300*400各1件.共12套

10電源插座采用多功能”柏帝”牌二位三腳插座*10套左右各5套,配0.8mm鋅板剪折做線槽及電線.

11，工裝板600mm*600mm*14套.

12， ①雙層工裝板上一層為圓形,直徑500,采用16mm厚板面貼防靜電(0.2mm厚)膠皮,下一層為四方形600mm*600mm采用18mm木板面白色防火板,下一層底面巾1.2mm厚鋅板.

· ②工裝主體采用高密度轉盤,合軸承定位件.上下層工裝板周邊包綠色T型膠邊.

· ③工裝板旋轉90后可定位,同時可作360旋轉.

· 牛眼臺*2套(規格L1780mm*W640mm*H750mm)。用40*40方通做底架,而鋪2..0mm鐵板,鐵板上面裝”牛眼”模向,縱向每100mm裝1個,布滿眼臺..

福州流水線,福州自動化流水線,福州組裝線,福州自動組裝線福州板鏈，福州倍速，福州滾筒，福州手動組裝線案例圖

Automation technology is widely used in industry, agriculture, military, scientific research, transportation, commerce, medical care, services and households. The use of automation technology can not only liberate people from heavy physical labor and part of mental labor, as well as harsh and dangerous working environments, but also expand the functions of human organs, greatly increase labor productivity, and enhance human understanding of the world and transform the world. ability.

Assembly line, automatic assembly line, assembly line, automatic assembly line: the parameters of the circular assembly line are as follows:

1 Assembly line, automatic assembly line, assembly line, automatic assembly line specifications: L6000*W1780*H2000 (mm) (generally customized according to customer needs.

2. Assembly line, automatic assembly line, assembly line, automatic assembly line. The main body of the assembly line is made of 40*40*1.5mm (thick) iron square pass, which is installed every 2 meters.

3. Reinforcing ties are made of 25*25 iron square pass, one on each side.

4. The bladder and spleen are made of 40*60*1.5mm flat pass.

6. Ф38 galvanized drum is used as supporting tooling and conveying medium, every 100mm*1.

7. The lamp holder is made of 40*40*1.5mm square pass, and one piece is installed every 2 meters.

8, assembly line, automatic assembly line, assembly line, automatic assembly line lighting part adopts 40W*48""Qili" double light tube with cover *8 sets, with 25*50 lamp trough and wire

9. The work guide bookshelf adopts H-shaped special aluminum trough, with 1 piece of 300*400 green transparent acrylic board per meter. A total of 12 sets

10 The power socket adopts the multifunctional "Bodi" brand two-position three-pin socket*10 sets, 5 sets each, and 0.8mm zinc plate is cut and folded to make the trunking and wires.

11. Tooling board 600mm*600mm*14 sets.

12. ①The first layer of the double-layer tooling board is circular, with a diameter of 500, with a 16mm thick board surface pasted with anti-static (0.2mm thick) rubber, and the next layer is a square 600mm*600mm with a white fireproof board on a 18mm wooden surface. A layer of 1.2mm thick zinc plate on the bottom face towel.

· ②The main body of the tooling adopts a high-density turntable with bearing positioning parts. The upper and lower tooling plates are surrounded by green T-shaped rubber edges.

③The tooling plate can be positioned after 90 rotations, and it can be rotated 360 at the same time.

· Bull's eye table * 2 sets (specification L1780mm*W640mm*H750mm). Use a 40*40 square pass as the base frame, and pave a 2..0mm iron plate with a "bull's eye" pattern on the iron plate, and install one every 100mm in the longitudinal direction, covering the eye table.