山东流水线,自动化流水线,组装线,自动组装线:技术参考(图)

 自动化技术广泛应用于工业、农业、军事、科学研究、交通运输、商业、医疗、服务和家庭等方面。采用自动化技术不仅可以把人从繁重的体力劳动和部分脑力劳动以及恶劣、危险的工作环境中解放出来，而且能扩展人的各器官功能，极大地提高劳动生产率，增强人类认识世界和改造世界的能力。

山东流水线,山东自动化流水线,山东组装线,山东自动组装线：环形组装线参数如下：

1 山东流水线,山东自动化流水线,山东组装线,山东自动组装线规格: L6000*W1780*H2000(mm)(一般根据客户需求定制。

2， 山东流水线,山东自动化流水线,山东组装线,山东自动组装线组装线主机脚采用40*40*1.5mm(厚)铁方通制作每2米安装1个.

3，加固拉筋采用25*25铁方通制作左右各1条.

4 ，膀脾采用40*60*1.5mm扁通制作.

6， 采用Ф38镀锌滚筒做承托工装楹输送介质,每100mm*1条.

7 ，灯架用40*40*1.5mm方通制作,每2米安装1个.

8，山东流水线,山东自动化流水线,山东组装线,山东自动组装线照明部分采用40W*48″”奇利”双支带罩光管*8套, 配25*50灯槽及电线

9 ，作业指导书架采用H型专用铝槽,配每米绿色透明亚克力板300*400各1件.共12套

10电源插座采用多功能”柏帝”牌二位三脚插座*10套左右各5套,配0.8mm锌板剪折做线槽及电线.

11，工装板600mm*600mm*14套.

12， ①双层工装板上一层为圆形,直径500,采用16mm厚板面贴防静电(0.2mm厚)胶皮,下一层为四方形600mm*600mm采用18mm木板面白色防火板,下一层底面巾1.2mm厚锌板.

· ②工装主体采用高密度转盘,合轴承定位件.上下层工装板周边包绿色T型胶边.

· ③工装板旋转90后可定位,同时可作360旋转.

· 牛眼台*2套(规格L1780mm*W640mm*H750mm)。用40*40方通做底架,而铺2..0mm铁板,铁板上面装”牛眼”模向,纵向每100mm装1个,布满眼台..

山东流水线,山东自动化流水线,山东组装线,山东自动组装线山东板链，山东倍速，山东滚筒，山东手动组装线案例图

Automation technology is widely used in industry, agriculture, military, scientific research, transportation, commerce, medical care, services and households. The use of automation technology can not only liberate people from heavy physical labor and part of mental labor, as well as harsh and dangerous working environments, but also expand the functions of human organs, greatly increase labor productivity, and enhance human understanding of the world and transform the world. ability.

Assembly line, automatic assembly line, assembly line, automatic assembly line: the parameters of the circular assembly line are as follows:

1 Assembly line, automatic assembly line, assembly line, automatic assembly line specifications: L6000*W1780*H2000 (mm) (generally customized according to customer needs.

2. Assembly line, automatic assembly line, assembly line, automatic assembly line. The main body of the assembly line is made of 40*40*1.5mm (thick) iron square pass, which is installed every 2 meters.

3. Reinforcing ties are made of 25*25 iron square pass, one on each side.

4. The bladder and spleen are made of 40*60*1.5mm flat pass.

6. Ф38 galvanized drum is used as supporting tooling and conveying medium, every 100mm*1.

7. The lamp holder is made of 40*40*1.5mm square pass, and one piece is installed every 2 meters.

8, assembly line, automatic assembly line, assembly line, automatic assembly line lighting part adopts 40W*48""Qili" double light tube with cover *8 sets, with 25*50 lamp trough and wire

9. The work guide bookshelf adopts H-shaped special aluminum trough, with 1 piece of 300*400 green transparent acrylic board per meter. A total of 12 sets

10 The power socket adopts the multifunctional "Bodi" brand two-position three-pin socket*10 sets, 5 sets each, and 0.8mm zinc plate is cut and folded to make the trunking and wires.

11. Tooling board 600mm*600mm*14 sets.

12. ①The first layer of the double-layer tooling board is circular, with a diameter of 500, with a 16mm thick board surface pasted with anti-static (0.2mm thick) rubber, and the next layer is a square 600mm*600mm with a white fireproof board on a 18mm wooden surface. A layer of 1.2mm thick zinc plate on the bottom face towel.

· ②The main body of the tooling adopts a high-density turntable with bearing positioning parts. The upper and lower tooling plates are surrounded by green T-shaped rubber edges.

③The tooling plate can be positioned after 90 rotations, and it can be rotated 360 at the same time.

· Bull's eye table * 2 sets (specification L1780mm*W640mm*H750mm). Use a 40*40 square pass as the base frame, and pave a 2..0mm iron plate with a "bull's eye" pattern on the iron plate, and install one every 100mm in the longitudinal direction, covering the eye table.