天津流水线,天津非标流水线,天津非标输送流水线汽车仪表板分装输送装配流水线技术指标参考

天津流水线,天津非标流水线:汽车仪表板分装输送装配流水线 ：

天津流水线,天津非标流水线：用于仪表板分装和输送，主要装入中央面板、线束总成、扬声器、收放机、继电器和装饰板。

天津流水线,天津非输送标流水线：输送和储存段采用双层倍速链式输送机。仪表板在端部进行上件，然后进入分装。装配时，仪表板可旋转，以方便安装。

天津流水线,天津非标流水线：在装配工艺段设臵平衡轨，以保证仪表板在进行装配时不发生倾斜及晃动。分装完的仪表板放到货架上，通过电瓶车输送至内饰主线仪表板总装工位。空托盘下降到下层，通过下层链快速返回到作业开始处。 

天津流水线,天津非标流水线图参考

Assembly line, non-standard assembly line: car dashboard sub-assembly conveying assembly line:

Assembly line, non-standard assembly line: used for instrument panel subassembly and transportation, mainly installed in the central panel, wiring harness assembly, speakers, radios, relays and decorative panels.

Assembly line, non-conveying standard assembly line: the conveying and storage section adopts double-speed chain conveyor. The instrument panel is loaded at the end, and then enters the sub-assembly. When assembling, the instrument panel can be rotated to facilitate installation.

Assembly line, non-standard assembly line: Set up a balance rail in the assembly process section to ensure that the instrument panel does not tilt and shake during assembly. The sub-assembled dashboard is placed on the shelf and transported to the main interior dashboard assembly station through the battery car. The empty pallet descends to the lower level and quickly returns to the beginning of the job through the lower chain.